Printing Out Network Setting Information

You can print out the current network settings of the machine using the operation panel of the machine.

Important

• This print out contains valuable information about your computer. Handle it with care.

1. Make sure that the machine is turned on.

2. Load a sheet of A4 or Letter-sized plain paper.

3. Flick the HOME screen, then tap Setup.

   Using the Operation Panel

   The menu screen is displayed.

4. Tap Device settings.

5. Tap LAN settings.

6. Tap Confirm LAN settings.

7. Tap Print LAN details.

8. Tap Yes.

   The machine starts printing the network setting information.

   The following information on the machine's network setting is printed out.

   Item	Explanations of the item	Setting
   Wireless LAN	Wireless LAN	Enable/Disable
   Connection	Connection status	Active/Inactive
   MAC Address	MAC Address	XX:XX:XX:XX:XX:XX
   SSID	SSID	SSID of the wireless LAN/SSID of the access point mode
   Password	Password	Password of the access point mode (8 to 10 alphanumeric characters)
   Communication Mode	Communication Mode	Infrastructure/Access Point Mode
   Channel *1	Channel	XX (1 to 13)
   Encryption	Method of the Encryption	none/WEP/TKIP/AES
   WEP Key Length	WEP Key Length	Inactive/128/64
   Authentication	Method of the Authentication	none/auto/open/shared/WPA-PSK/WPA2-PSK
   Signal Strength	Signal Strength	0 to 100 [%]
   TCP/IP Version	TCP/IP Version	IPv4 & IPv6/IPv4
   IPv4 IP Address	Selected IP Address (IPv4)	XXX.XXX.XXX.XXX
   IPv4 Default Gateway	Default Gateway (IPv4)	XXX.XXX.XXX.XXX
   Subnet Mask	Subnet Mask	XXX.XXX.XXX.XXX
   IPv6 IP Address *2	Selected IP Address (IPv6)	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IPv6 Default Gateway *2	Default Gateway (IPv6)	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Subnet Prefix Length *2	Subnet Prefix Length	XXX
   IPsec *3	IPsec setting	Active
   Security Protocol *3	Method of the Security Protocol	ESP/ESP & AH/AH
   Wireless LAN DRX	Discontinuous reception (wireless LAN)	Enable/Disable
   Wired LAN	Wired LAN	Enable/Disable
   Connection	Status of the Wired LAN	Active/Inactive
   MAC Address	MAC Address	XX:XX:XX:XX:XX:XX
   TCP/IP Version	TCP/IP Version	IPv4 & IPv6/IPv4
   IPv4 IP Address	Selected IP Address (IPv4)	XXX.XXX.XXX.XXX
   IPv4 Default Gateway	Default Gateway (IPv4)	XXX.XXX.XXX.XXX
   Subnet Mask	Subnet Mask	XXX.XXX.XXX.XXX
   IPv6 IP Address *2	Selected IP Address (IPv6)	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IPv6 Default Gateway *2	Default Gateway (IPv6)	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Subnet Prefix Length *2	Subnet Prefix Length	XXX
   IPsec *3	IPsec setting	Active
   Security Protocol *3	Method of the Security Protocol	ESP/ESP & AH/AH
   Wired LAN DRX	Discontinuous reception (wired LAN)	Enable/Disable
   Other Settings	Other settings	-
   Printer Name	Printer name	Printer name (Up to 15 alphanumeric characters)
   WSD	WSD setting	Enable/Disable
   WSD Timeout	Timeout	1/5/10/15/20 [min]
   LPR Protocol	LPR protocol setting	Enable/Disable
   Bonjour	Bonjour setting	Enable/Disable
   Bonjour Service Name	Bonjour service name	Bonjour service name (Up to 52 alphanumeric characters)
   DNS Server	Getting DNS Server automatically	Auto/Manual
   Primary Server	Primary server address	XXX.XXX.XXX.XXX
   Secondary Server	Secondary server address	XXX.XXX.XXX.XXX
   Proxy Server	Proxy Server setting	Enable/Disable
   Proxy Port	Specifying Proxy Port	1 to 65535
   Proxy Address	Proxy Address	XXXXXXXXXXXXXXXXXXXX

   ("XX" represents alphanumeric characters.)

   *1 Depending on the country or region of purchase, one of the channels from 1 to 11 is printed.

   *2 Only when IPv6 is enabled, the status of the network is printed.

   *3 Only IPv6 and the IPsec setting are enabled, the status of the network is printed.